Lombex Impera Lux Nova WiFi Bulb

Q: What do I need to prepare before connecting my Lombex Impera Lux Nova WiFi Bulb?

One smart device (smart phone, smart tablet...), 2.4Ghz network, Lombex Impera Lux Nova WiFi Bulb. Only need these, you can easily control your lamp from anywhere via your smart device.

 

Q: What do I need to pay attention to before connecting my Lombex Impera Lux Nova WiFi Bulb?

1.Confirm device is powered on.

2.Confirm adding deivce is under 2.4 Wifi channel.  If your WiFi router is 2.4Ghz or 5G hz or both together ? Make sure the first time of connection , your WiFi router is in 2.4Ghz . After connect sucess , can change to 5G .

3.Confirm that deivce, smartphone and router are as close to each other.

 

Q: How to connect  Lombex Lux Nova Bulb to my WiFi Router ?

1.Please install the Lombex App from the IOS or Android App Store

2.Power on the WiFi smart bulb then switch it OFF / ON 3 times by following these steps: OFF-ON-OFF-ON-OFF-ON, until light begins to flash

A:First paring mode (When bulb flash quickly):

   1.Open the Lombex App on your device

   2.Register a new account or Login to an existing one

   3.Tap the Add Device button or the + at the top corner

   4.Follow the instructions to connect the smart bulb to your WiFi network  

   5.Give your device a unique name, and this name will be used for the Lombex App /Alexa or Google

 B:Second pairing mode (When bulb flash slowly) :

  1. If bulb flash slowly ,Please Tap the "+ "at the top corner select the AP mode in the top right .
  2. Press confirm indicator slowly blink ,and enter your wifi password .
  3. Go to the WiFi setting , find "Smart life ×××" . Select it and connected to the hotspot.
  4. After connected, Please return to the Lombex App,you will find the device connected.

 

    Q: I have two bulb , one is flashing faster, the other is slower , What can I do ?

    1. Please select one of the bulbs and use your switch turn on/off 5 times until the flashing status  match to  another bulb .

    2. Then select the corresponding connection mode according to the flashing status of the lamp

    If the bulb flash quickly, pls see teh video: https://www.youtube.com/watch?v=LZr8Kfrf6bU

    if the bulb flash slowly, pls see the vide :

     

    Q: Why I removed the bulb from the lamp holder but it was still on?

    Please rest assured that this is normal. Because our light bulb has an accessory called capacitor. It is equivalent to a tiny battery and has a short-term power storage function. So when you turn off the light bulb, he will keep on for 10~15 seconds.

     

    Q: How do I reset the Wi-fi bulb for a different wifi ?

    1.Firstly , Open the lombex app click the bulb you connect , find the last one "Restore Manufactory Defauts" .
    2. After step 1 , please check the are flashing quickly or slowly  . If it didn't flashing at all , use your switch turn on/off 5 times .

    If bulb are flashing quickly , please see below instuction video : https://www.youtube.com/watch?v=LZr8Kfrf6bU

    3.If bulb are flashing slowly , Please use AP model ways :
    (1). make sure the strip light are flashing slowly .
    (2). Tap the "+ "at the top corner select the AP mode in the top right .
    (3). Press confirm indicator slowly blink ,and enter your wifi password .g
    (4). Go to the WiFi setting , find "Smart life ×××" . Select it and connected to the hotspot.
    (5). After connected, Please return to the Lombex App,you will find the device connected.

     

    Q: We have followed all instructions and it looks like it’s trying to connect but when it gets to 100% just says failed and retry ? 

    In this case, please  use your switch turn on/off 5 times until the bulb becomes slow flash. And you can choose the "AP Mode" to connect it.

    1.Please Tap the "+ "at the top corner select the AP mode in the top right .

    2.Press confirm indicator slowly blink ,and enter your wifi password .

    3.Go to the WiFi setting , find "Smart life ×××" . Select it and connected to the hotspot.

    4.After connected, Please return to the Lombex App,you will find the device connected.

     

    Q: How to connect my Lombex Impera Lux Nova WiFi Bulb with Alexa?

    1.Open the Alexa app and go to Skills

    2.Search for the Lombex skill and enable it

    3.Enter your Lombex account details and tap Link Now

    4.Return to the Alexa app and tap Discover Devices

    5.The smart bulb should now appear in Alexa's Devices with your predefined name

    Now you can give voice commands to Alexa to control the smart bulb

     

    Q:How to connect my Lombex Impera Lux Nova WiFi Bulb to Google Home?

    1.Add device : make sure there's at least one device that support Google Home in device list.

     2.Modify device name: changing device name to a easily recognized one. Such as :living room light, bedroom light

     3.Sut up Google HOme: make sure phone system language is English.Then use Home App to set up Google Home.

     4.Add Home Google Action: add device in Home Control of the Home app. Select "Smart Life", then fill in the correct login into your app account to finish the account linking. Your device should be listed in Home Control device list now.

     5.Control device: Now you can control devices through Google Home. The following voice commands are supported:

                                                                       OK Google, turn on the plug

                                                                       OK Google, set bedroom light to 35%

                                                                       OK Google, brighten bedroom light

                                                                       OK Google, kitchen light to green.

     

    Q: How to connect  Lombex Lux Nova Bulb to IFTTT?

    1.Download and register the IFTTT Account

    2.Prepare Lombex app account 

    3.Login IFTTT and search for " smartlife " connection

    4.Login Lombex account and connection , choose your location

    5.After connection , choose the applet which you need and setting .

    6.Set the applet : a.Select " new applet " click "this" , select the app which you want to set as condition . b. Select the " trigger "  c. Select " smartlife " app as the executor d.Select action , choose "turn on " and choose th   device you have connect with lombex app. 

    7. Click  "finish"

     

    Q: Is there a video to guide me to operate my Lombex Lux Nova Bulb?

    If got any problem on Lombex Lux Nova, please kindly see this instruction video will show you how to connect:  https://youtu.be/ryBHYL0daTY

    Or search" Lombex smart Bulb" on YouTube.